What's New

Torch Grade

Selvedge Edge Films

Engineered Films
Selvedge Edge Films : IFI92 - Silicone Coated

Product description:
General purpose polyester film coated one side with an easy silicone release.

Part Number:  TBD

Silicone Type:  UV Curable, Epoxy
Applied silicone coat weight:   0.5-0.9 lbs/ream Nominal
Substrate:  Polyester
 

PHYSICAL PROPERTIES - ROLL AVERAGES +/- 3 STANDARD DEVIATIONS

PROPERTIES

 UNITS

TYPICAL VALUES

TEST METHODS
0.5mil 1mil 2mil 3mil 4mil
Thickness μm 13 25 50 75 100 Micrometer Method
Tensile Strength M D kg/mm2 22
22		 22 22 22 21 ASTM-D882
T D 22 22 22 21
Elongation at Break M D % 150
130		 150 150 150 150
T D 130 130 130 130
Heat
Shrinkage		 M D % 1.2 1.2 1.1 1 1 ASTM-D1003
(150 deg. C/30min)
T D 0.2 0.2 0.2 0.2 0.2
Haze % 2.2 2.2 2.2 2.2 2.2 ASTM-D1003
Light Transmission % 88 88 88 88 88
Density g/cc 1.4 1.4 1.4 1.4 1.4 ASTM-D1505

The shelf life is 1 year from date of manufacture. As with all release liners, this product should be tested under end-use conditions to ensure it meets the requirements of the actual application. Re-testing of release liners older than 1 year is recommended. The results should only be regarded as a general guide to material properties and not as a guarantee.

*Rayven Test Method: 1: Tesa 7475 Tape, 24 hr dwell, peeled @ 300"/MIN @ 180°
 
  © 2008. Integrated Films. All Rights Reserved.   Designed and Hosted by: The L Connection, Inc.