What's New Torch Grade Selvedge Edge Films Engineered Films	Engineered Films : Toray PS10   Lumirror® PS10 PS10 is a plain transparent asymmetrical polyester film with one side modified to improve printing, laminating, and extrusion adhesion for a wide variety of applications.   Key Features - Excellent mechanical properties - Good machinability due to surface roughness properties - Improved adhesion of inks, adhesives, cohesives and polyethylene on the modified surface - Excellent silicone adhesion properties Applications - Industrial application requiring a primed surface - Packaging applications where FDA compliance for direct food contact is not required - Release film applications where superior silicone adhesion is desired - Extrusion coated applications where superior polyolefin adhesion is desired Technical Data PROPERTIES METHOD UNITS TYPICAL VALUES Gauge 0.00001" 36 92 200 Nominal Yield in2/lb 55,700 21,500 9,900 Tensile Strength at Break MD TD ASTM D882 lb/in2 41,000 36,700 36,700 38,700 27,900 28,600 Young's Modulus MD TD ASTM D882 lb/in2 743,700 743,700 685,400 746,600 666,900 725,200 Elongation at Break MD TD ASTM D882 % 107 116 142 124 183 123 Heat Shrinkage (150°C for 30 minutes) MD TD ASTM D1204 % 2.2 0.8 1.8 0.5 1.0 0.9 Coefficient of Friction A-side vs. B-side ASTM D1894 μS μD 0.47 0.44 0.31 0.28 0.31 0.26 Haze (1 sheet) ASTM 1003 % 2.6 4.3 7.2
	© 2008. Integrated Films. All Rights Reserved.   Designed and Hosted by: The L Connection, Inc.